Temperature Readout Selection - Webasto DVS100 Installation, Operation And Maintenance Manual

Reduced Charge Rate
Setup
Reduced Rate Enable:
CLEAR
OFF
Reduced Chr Start time
00:00
Reduced Chr End time
05:00
Reduced Charge Cur Lim
020 Amps/100Amphrs

5.11.8 Temperature Readout Selection

Allows the user to set the battery temperature display format to either degrees Fahrenheit or
Celsius.
From the "Temperature Readout Selection" screen, press <enter> to display the current format.
Press <enter> again to enable editing. Use the <up> and <down> arrows to select the desired
format for the temperature display and press <enter> to save your configuration. Press <clear> to
exit.
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
ENTER
SELECT
SELECT
SELECT
SELECT
Figure 5- 19 Reduced Charge Rate Setup Screens
Temperature Readout
Selection
CLEAR
Display Temp in:
Fahrenheit
CLEAR
Display Temp in:
Celsius
Figure 5- 20 Temperature Readout Selection Screens
DVS100 Installation, Operation and Maintenance
Charger Configuration
CLEAR
ENTER
Reduced Rate Enable:
ON
SELECT
ENTER
Press ENTER and use the UP and
DOWN arrow buttons to set the
parameter to the appropriate value.
ENTER
Press ENTER again to accept the
selection made.
Press CLEAR to retain the original
ENTER
value
Charger Configuration
CLEAR
ENTER
35
CLEAR
Webasto Charging Systems, Inc.