Charge Time Control - Webasto DVS100 Installation, Operation And Maintenance Manual

CLEAR

5.11.14 Charge Time Control

The Charge Time Control entry screens (see Figure 5- 26) allow the user to review and edit the
scheduled charge delays for the charger.
In each menu, press <enter> to enable editing (the value will start to flash) and use the <up> and
<down> arrows to adjust the value. Press <enter> again to accept new value, or <clear> to cancel
the editing and retain the old value.
Auto Charge Restart – Displays and edits the number of hours before an automatic charge restart
event. This event will take place if a vehicle is left connected to the charger for the time entered
after its charge event has completed.
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
Set Date and Time
ENTER
Hours
13
ENTER
Minutes
15
ENTER
Month
11
ENTER
Day
24
ENTER
Year
2001
ENTER
Figure 5- 25 Date and Time setting menus
DVS100 Installation, Operation and Maintenance
Charger Configuration
CLEAR
ENTER
Press ENTER and
use the UP and
ENTER
DOWN arrow
buttons to set the
parameter to the
appropriate value.
ENTER
Press ENTER again
to accept the
selection made.
ENTER
Press CLEAR to
retain the original
value
ENTER
40 Webasto Charging Systems, Inc.