Charger Id; Date And Time - Webasto DVS100 Installation, Operation And Maintenance Manual

5.11.12

Charger ID

Allows the user to enter the 5-character numeric charger ID.
From the "Charger ID" screen Press <enter> and the Charger ID will flash. Use the <up> and
<down> buttons to set the Charger ID. Press <enter> to accept the new value and press <clear>
to return to higher level menus.
5.11.13

Date and Time

The Date and Time entry screens (see Figure 5- 25) allow the user to review and edit the date and
time stamp in the charger. This internal date and time is used in all of the logging and scheduling
functions. Changing the date and time will not affect previously logged data. These data are
stored in the charger and are preserved even if power is removed from the charger.
Note: Incorrect programming of the date and time will result in incorrect time stamps in the log files
and mistiming any "time of day" scheduling features possibly resulting in incorrect charging of the
packs.
In each menu, press <enter> to enable editing (the value will start to flash) and use the <up> and
<down> arrows to adjust the value. Press <enter> again to accept new value, or <clear> to cancel
the editing and retain the old value.
1. Hours - Displays and edits the charger internal clock hours in 24-hour time (valid values 01-24).
2. Minutes - Displays and edits the charger internal clock minutes (valid values 00-59).
3. Month - Displays and edits the charger internal clock month (valid values 1-12)
4. Day - Displays and edits the charger internal clock day (valid values 1-31).
5. Year - Displays and edits the charger internal clock year (valid values 2000-2099)
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
CLEAR
Charger ID:
00000
ENTER
CLEAR
Charger ID:
00000
Figure 5- 24 Charger ID Screens
DVS100 Installation, Operation and Maintenance
Charger Configuration
Use the UP and DOWN arrow
buttons to set each of the 5 digits.
Press ENTER again to accept each
selection made.
Pressing ENTER to accept the last
th
5 character transitions to the next
Charger Configuration screen.
Press CLEAR to go back to the
previous character entered.
Press CLEAR twice to retain the
original value.
39 Webasto Charging Systems, Inc.