Webasto DVS100 Installation, Operation And Maintenance Manual page 33

Mhe intelligent fast charging systems

Hide thumbs Also See for DVS100:

Table of Contents

9. Ventilation System allows the user to configure the operation of a ventilation system. This

feature is only applicable in systems where a ventilation system has been installed and

connected to the charger. If a Ventilation system is activated, the air pump system is

disabled. The default setting is "OFF"

10. Air Circulation Control allows the user to configure the operation of an Air Pump system This

feature is only applicable in systems where an Air Pump system has been installed and

connected to the charger. If an air pump system is activated, the ventilation system is

disabled. The default setting is "OFF".

11. Watering System allows the user to set the configuration of a watering system

This feature is only applicable in systems where a watering system has been installed

and connected to the charger. The watering system is always set to turn on two hours into

the EQ. The default setting is "OFF"

12. Charger ID allows the user to enter the charger ID (5 character numeric). The default setting is

"00000".

13. Set Date and Time allows the user to set the date and time in the internal clock of the charger.

14. Charge Time Control allows the user to set scheduled charge delays for the charger. The

default setting is 6 hours.

15. Output Format Selection allows the user to configure the format of their output data. The

customers using the IVECs system can select the "IDS Mode" while customers that are not

using IVECs can select "Standard Mode".

is only available in the English US Menu screens. If IDS mode is required in Europe, set

IDS Mode on the English US Menu screen and then go back to the preferred EU language

to finish setting the rest of the Charger's Configuration.

16. Port Assignment allows the installer to set the Port Assignment to Port A or Port B.

20182-W-03-01

IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS

DVS100 Installation, Operation and Maintenance

The default setting is "Standard Mode". This menu

Webasto Charging Systems, Inc.

Table of Contents