Figure 225. Lifting Flap On Front Side Of Riser Assembly; Figure 226. Detaching Accelerator Add-In Card From Riser Assembly - Intel D50DNP Series Integration And Service Manual

Intel® Server D50DNP Family Integration and Service Guide
4. Remove the screw that holds the flap and lift the flap up on the front side of the riser assembly.
Flap not shown
in figure

Figure 226. Detaching Accelerator Add-In Card from Riser Assembly

5. Remove the two screws on each corner of the back side to detach the accelerator add-in card from
the riser assembly.
Note: The direction of the screws on the back side depends on whether the accelerator add-in card is
in the top slot or bottom slot of the riser assembly.

Figure 225. Lifting Flap on Front Side of Riser Assembly

169