Table of Contents
Advertisement
5.
System Packaging Assembly Instructions
The original Intel packaging is designed to provide protection to a fully configured system and tested to
meet ISTA (International Safe Transit Association) Test Procedure 3A (2018). The packaging is designed to
be reuseable.
The original packaging includes two layers of boxes (an inner box and an outer shipping box) and inner
packaging components. The boxes and packaging components are designed to function together as a
protective packaging system.
When reused, all the original packaging materials must be used, including both boxes and each inner
packaging component. In addition, all inner packaging components must be reinstalled in the proper
location to ensure adequate protection of the system for subsequent shipment.
Note: The design of the inner packaging components does not prevent improper placement within the
packaging assembly. Only one correct packaging assembly allows the package to meet the ISTA
(International Safe Transit Association) Test Procedure 3A (2018) limits.
Failure to follow the specified packaging assembly instructions may result in damage to the system during
shipment.
1. Put front cushion (M99013-001) on the left side and rear cushion (M99001-001) on the right side of
the inner box. Place 12 paper inserts (M98998-001) into the cushion slots as shown.
2. Wrap the red EPE foam sheet around the system.
Intel® Server D50DNP Family Integration and Service Guide
91
Advertisement
Table of Contents
