Standard Riser Assembly Removal; Figure 68. 2U Riser Assembly And Riser Card Features; Figure 69. Removing A Riser Assembly With Standard Riser Card - Intel D50DNP Series Integration And Service Manual

Required Tools and Supplies
PCIe* add-in card
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
• Phillips* head screwdriver #1 and #2
3.4.1

Standard Riser Assembly Removal

Figure 69. Removing a Riser Assembly with Standard Riser Card

1. Using Phillips screwdriver #1 remove two screws that secure the riser assembly to the front of the
module (see Letter A).
Using Phillips screwdriver #2 loosen the captive screw at the back of the riser assembly. (see Letter B)
2.
3. Carefully remove the riser assembly by lifting it up and away from the module (see Letter C).
66
Intel® Server D50DNP Family Integration and Service Guide

Figure 68. 2U Riser Assembly and Riser Card Features