10. Remove the screws securing the power distribution board (PDB) to the chassis with a Phillips* head
screwdriver #2 (see Letter A).
11. Remove the PDB by lifting it upwards, tilting up the front side of the PDB, and then lifting the board
out (see Letter B).
12. Remove the new power distribution board (PDB) from its package.
13. Lower the PDB into the chassis, tilting down the back side and then sliding the board to the front
(see Letter A).
14. Secure the power distribution board using a Phillips* head screwdriver #2 and the provided screws
(see Letter B).
188
Intel® Server D50DNP Family Integration and Service Guide
Figure 257. Installing the Power Distribution Board