Figure 133. Reinstall The Socket Cover; Figure 134. Processor Removal From Phm Assembly - Intel D50DNP Series Integration And Service Manual

• Squeeze the finger grips at each end of the cover (see Letter A).
Carefully lower the cover over the four alignment pins of the bolster plate and onto the
•
processor socket (see Letter B).
Release finger grips to lock the cover in place.
•
Ensure that the socket cover is locked in place.
•
Caution: Do not press down on the center of the socket cover.
7.3.1.2 PHM Disassembly
1. While holding down the PHM, rotate the lever (see Letter A) from right to left until the processor lifts
free from the processor carrier clip.
2. Holding down the processor carrier clip, carefully lift the processor out of the processor carrier clip
(see Letter B).
Intel® Server D50DNP Family Integration and Service Guide

Figure 133. Reinstall the Socket Cover

Figure 134. Processor Removal from PHM Assembly

117