7.5
Riser Card and PCIe Add-In Card Replacement
The Intel® Server D50DNP Family supports either up to two (1U modules) or up to four (2U modules) low-
profile PCIe* add-in cards.
This section provides assembly and installation procedures for modules that require low-profile add-in card
installation. The following procedures apply to both 1U and 2U modules in both air-cooled and liquid-
cooled configurations.
Note: The PCIe* accelerator module has additional support for up to four full-height, full-length, and
double-width PCIe* cards. Follow the replacement procedures in
Required Tools and Supplies
Intel riser card spare kit
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
•
Phillips* head screwdriver #1 and #2
Available Riser Card Options
1U MCIO* riser card (installed in 1U riser assembly) for 1U module
•
•
1U Standard riser card (installed in 1U riser assembly) for 1U module
•
2U riser card (installed in 2U riser assembly) for 2U module
146
Intel® Server D50DNP Family Integration and Service Guide
Figure 187. 1U MCIO* Riser Card
Section 7.9
for those cards.