7.17 System Battery Replacement
Required Tools and Supplies
Compatible CR2032 lithium battery
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
1. Remove the selected module from the server chassis (see
2. Remove the right riser assembly from the module (see
3. Locate the battery on the server board.
4. Gently press the metal clip as shown to release the battery (see Letter A).
5. Remove the battery from the plastic socket (see Letter B).
6. Dispose of the battery according to local laws.
7. Remove the new lithium battery from its package.
8. Observing the correct polarity, insert the battery into the battery socket (see Letters C and D).
9. Reinstall the riser assembly (see
10. Reinstall the module in the chassis (see
11. Use the BIOS Setup Utility to restore BIOS settings and reset the system time and date.
192
Intel® Server D50DNP Family Integration and Service Guide
Figure 262. Removing System Battery
Figure 263. Installing System Battery
Section
Section
Section
7.5).
Section
7.1.2).
7.1.1).
7.5).