Inserting Coding Keys - WAGO 750 Series Manual

Serie 750, 753
3. Pull the I/O module out of the assembly by the release tab.
ð When the I/O module is pulled out of the assembly, the electrical connections of the
data and power contacts are separated.

7.7 Inserting Coding Keys

For 753 Series I/O modules, the connection between the I/O module and the pluggable
connector can be coded. For the coding, proceed as follows:
1. Insert the pin into the socket.
2. Position the assembled coding keys in the I/O module.
System manual | Version: 3.3.1
Assembly and Disassembly
Figure 30: Detaching the 753 Series I/O Module
Figure 31: Putting the Coding Keys Together
51