Din-Rail Characteristics - WAGO 750 Series Manual

Planning
Overview of Mounting Positions
The mounting positions shown correspond to the final orientation of the products within
the additional enclosure.
(nominal mounting position)
*)
In conjunction with the additional enclosure

5.2.7 DIN-Rail Characteristics

To ensure optimum system construction, all system components can be securely
snapped onto a DIN-rail (35 mm). Observe:
• The material must have high corrosion resistance.
• The DIN-rail geometry must not be altered.
• Prevent bending and twisting (torsion) e.g., by using sufficient attachment points.
32 System manual | Version: 3.3.1
Horizontal, left
Horizontal, right
For vertical installation, always mount an end stop below the node to pre-
Figure 16: Coordinate model: width (x), height (y), depth (z)
Horizontal, up
*)
(floor mounting position )
Vertical, top
vent it from slipping off.
Serie 750, 753
Horizontal, down
*)
(ceiling mounting position )
Vertical, bottom