Coding; Figure 12: Assembling The Coding Fingers; Figure 13: Inserting The Coding Fingers; Figure 14: Plugging The Connector Into Place - WAGO I/O-SYSTEM 750 Manual
2ai 4-20ma diff. 2-channel analog input module 4-20 ma differential inputs
Hide thumbs
Also See for I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
30
Mounting
5.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the module with
the appropriate connector.
1.
Insert the pin into the socket.
Figure 12: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows four different coding options (i.e.; 16 different
options using two coding fingers).
Figure 13: Inserting the Coding Fingers
3.
Place the connector onto the I/O module.
Figure 14: Plugging the Connector into Place
WAGO I/O-SYSTEM 750
753-454 2AI 4-20mA Diff.
Manual
Version 1.1.0
Advertisement
Chapters
Table of Contents
