Coding; Figure 15: Attachment Of Cable Binders; Figure 16: Assembling The Coding Fingers; Figure 17: Inserting The Coding Fingers - WAGO 750 Manual

46 Mounting

Figure 15: Attachment of Cable Binders

5.3.1

Coding

Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1. Insert the pin into the socket.

Figure 16: Assembling the Coding Fingers

2. Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).

Figure 17: Inserting the Coding Fingers

3. Place the plug onto the I/O module.
Manual
Version 1.0.0, valid from HW/SW Version 01/01
WAGO I/O System 750
753-661/000-004 4FDI 24V PROFIsafe