Attaching An I/O Module - WAGO 750 Series Manual

Serie 750, 753 Assembly and Disassembly
Figure 23: Locking the Head Station
ð The head station is now locked on the DIN-rail.

7.4 Attaching an I/O Module

1. Position the I/O module in such a way that the grove and spring are connected to the
preceding and, if applicable, the following components.
Figure 24: Inserting the I/O Module
2. Press the I/O module into the assembly until the I/O module snaps onto the DIN-rail.
System manual | Version: 3.3.1 47