Connecting Conductors To Push-In Cage Clamp - WAGO 750 Series Manual

Conductor Termination
8.1.2 Connecting Conductors to Push-in CAGE CLAMP®
Stranded and fine-stranded conductors with ferrules, as well as solid conductors can be
plugged directly into
Push-in CAGE CLAMP
For all other conductor types, an operating tool must be used to open the Push-in CAGE
CLAMP
To open a Push-in CAGE CLAMP
ü You need an operating tool.
1. Insert the operating tool at an angle into the rectangular opening above the connec-
tion to open the CAGE CLAMP
2. Insert the conductor into the corresponding connection opening (round housing
opening).
3. Remove the operating tool again to close the Push-in CAGE CLAMP
ð The conductor is now securely clamped.
54 System manual | Version: 3.3.1
®
Connectors.
®
.
Figure 36: Connecting Conductor to Push-in CAGE CLAMP
®
Connector, proceed as follows:
®
.
Serie 750, 753
®
®
.