Coding; Figure 12: Assembling The Coding Fingers; Figure 13: Inserting The Coding Fingers; Figure 14: Plugging The Plug Into Place - WAGO I/O SYSTEM 750 Series Manual
2 ai ±10 v dc, differential inputs 2-channel analog input module ±10 v
Hide thumbs
Also See for I/O SYSTEM 750 Series:
Table of Contents
Advertisement
32
Mounting
Pos : 26.14 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/Kodier ung der Stec ker Seri e 753 @ 4\mod_1240393983875_21.doc x @ 31217 @ 3 @ 1
5.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1.
Insert the pin into the socket.
Figure 12: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).
Figure 13: Inserting the Coding Fingers
3.
Place the plug onto the I/O module.
Figure 14: Plugging the Plug into Place
WAGO-I/O-SYSTEM 750
753-456 2 AI ±10 V DC, Differential inputs
Manual
Version 1.2.0
Advertisement
Chapters
Table of Contents
