Assembling/Disassembling Components; Inserting Coding Keys - WAGO 750 Series System Manual

Assembly and Disassembly

6.6 Assembling/Disassembling Components

6.6.1 Inserting Coding Keys

For 753 Series I/O modules, the connection between the I/O module and the pluggable
connector can be coded. For the coding, proceed as follows:
1. Insert the pin into the socket.
2. Position the assembled coding keys in the I/O module.
ð Due to its design, each coding pin allows four different coding options (i.e.; 16 dif-
3. Put the pluggable connector on the I/O module.
ð After removing the pluggable connector, the sockets remain in the I/O module.
48 System manual | Version: 3.0.2
ferent options using two coding keys).
Serie 750, 753
Figure 29: Putting the Coding Keys Together
Figure 30: Inserting Coding Keys
Figure 31: Plugging the Connector into Place