WAGO 750 Series Manual page 37

Serie 750, 753
3
4
5
U
S
U
F1
U
F2
U
F3
Power Supply with FE Power Jumper Contact
If an FE power contact is required after the supply filter (750-626/xxx-xxx), an additional
supply module is required after the supply filter. For this purpose, the field supply from the
supply filter (750-626/xxx-xxx) must be bridged to the supply module.
Figure 18: Power Supply Concept for Marine Applications – Classes A and B with FE Power Jumper Contact
1
2
3
U
S
U
F1
FE
System manual | Version: 3.3.1
Filter module for field-side power supply, 24 VDC, HI GF (750-624/020-002) or
Filter module for field-side power supply, 24 VDC, HI (750-624/020-000)
Distance module, 24 VDC / 230 VAC (750-616/030-000)
Power supply, 230 VAC/DC, with diagnostics, with fuse holder (750-611) or
Power supply, 230 VAC/DC, without diagnostics, with fuse holder (750-609) or
Power supply, 230 VAC/DC, without diagnostics, without fuse holder (750-612)
System supply (24 VDC)
Field supply 1 (24 VDC)
Field supply 2 (24 VDC)
Field supply 3 (230 VAC)
Head station
Supply filter, 24 VDC, HI GF (750-626/020-002) or
Supply filter, 24 VDC, HI (750-626/020-000) or
Supply filter, 24 VDC, HI / T (750-626/025-001)
Power supply, 24 VDC (750-602) or
Power supply, 24 VDC, with fuse (750-601) or
Power supply, 24 VDC, with fuse and diagnostics (750-610)
System supply (24 VDC)
Field supply 1 (24 VDC)
Functional ground
1 2 3
U U FE
F1 S
Planning
37