Operations Performed During On Going Conferences; Adding A Participant To A Conference - Polycom MGC-100 Getting Started Manual

Operations Performed During On Going
Conferences

Adding a Participant to a Conference

The following operations are described in this Getting Started Guide:
Adding a new participant to a conference
•
Connecting/Disconnecting participants
•
Muting/Unmuting participants
•
• Changing the Video Layout in a Continuous Presence conference
• Locking/Unlocking the conference
Extending the conference duration
•
Terminating the conference
•
Additional operations performed during On Going Conferences are described
in the MGC Manager User's Guide, Volume I, Chapter 6.
You can manually add dial-in or dial-out participants to an On Going
Conference by defining the participant properties.
The participant properties change according to the participant connection type
and network connection.
The following procedure describes the definition of a dial-out participant. and it
assumes that the default participant parameters will be used. Therefore, only
the parameters that you must define are described here. For a detailed
description of dial-in participant definition and the all participant parameters,
refer to the MGC Manager User's Guide–Volume I, Chapter 4.
Chapter 5 - Basic Operations
5-13