Polycom MGC-100 Getting Started Manual page 142

MGC-50/MGC-100 Getting Started Guide
7-4
connect at a higher line rate when moved to a Transcoding or
Continuous Presence conference.
• Setting the Entry Queue to Transcoding or Continuous Presence requires
Video resources, while a Video Switching Entry Queue does not.
•
An IP Only Entry Queue in Continuous Presence mode can only be defined
as Classic Continuous Presence, not as Software or Quad View mode
Continuous Presence.
• You can create several Entry Queues, each with a different set of
parameters, to match the parameters of target conferences.
6. Select the maximum possible Line Rate in which participants can
connect to the conference. If this Entry Queue will access Conferences
On Port, define the Line Rate as described in step 17 of "Creating an On
Going Video Conference" on page 7-6.
7. To define dial-in numbers for the Entry Queue, follow the instructions in
"Entry Queue Dial-in Number Table" on page 6-3.
8. Use the default values for the remaining parameters. These parameters
are described in the MGC Manager User's Guide, Volume II, Chapter 2.