Polycom MGC-100 Getting Started Manual page 146

MGC-50/MGC-100 Getting Started Guide
7-8
14. Click the Settings tab.
The Properties - Settings dialog box opens.
The parameters described here are the Basic parameters. The Advanced
parameters are usually not changed from their default values. For more
information about these Advanced parameters, see the MGC Manager
User's Guide, Volume I, Chapter 4.
15. Select the Restricted option if all participants use restricted lines whose
line rate for each channel is 56 Kbps instead of 64 Kbps. If only some of
the participants use restricted lines, do not select this option. Instead,
select the restricted option when setting the parameters of the relevant
participants and set the conference video session type to Transcoding.
16. In the Line Rate field, specify the Kbps transfer rate:
In a Video Switching conference, you must select the highest transfer rate
common to all participants. In a conference with participants from mixed
networks (ISDN and H.323), the line rate defined for the ISDN
participant is the line rate that will be used for the H.323 participant.
In a Transcoding or Continuous Presence conference, select the desired
maximum Line Rate for the conference. The system will attempt to