Polycom MGC-100 Getting Started Manual page 134

MGC-50/MGC-100 Getting Started Guide
6-8
15. If you are defining an IP only, Audio Only (VoIP) conference, you can
use the Audio Alg field to select an additional audio algorithm (G.723/
G.729). In a mixed network environment, only G.711 is available.
16. If you want to set up advanced parameters, click the Advanced button in
either area. For more information, see the MGC Manager User's Guide
VoicePlus Edition, Chapter 3.
17. Click the Participants tab to add predefined participants to the
conference. For more information, see Chapter 5, "Adding a Participant
to a Conference" on page 5-13.
If you are defining a dial-in conference, this step may be skipped.
18. To complete the conference definition procedure, click OK from any of
the Conference Properties tabs. The Properties dialog box closes.
If all the requirements are met, and the properties are configured correctly, the
new conference is added to the On Going Conferences list in the Browser
pane of the main window. The conference starts immediately. You can click
the conference icon (
pane of the MGC Manager main window. For information about actions that
can be performed during the conference, refer to Chapter 5.
) to view the status data in the Status and Monitor