Polycom MGC-100 Getting Started Manual page 137

10. Select the Limited Sequences check box, to limit the number of times that
the Meeting Room can be activated. If this check box is cleared, the
Meeting Room activation is unlimited.
11. In the Number of Occurrences field, determine the number of times the
Meeting Room can be activated: 1 means that the conference can be
activated once, and then it will be deleted from the system. 2 or more
means that the conference can be activated that number of times, and the
conference remains in passive mode in between recurrences.
12. In the Meet Me Service - ISDN Service table, click the Plus (+) button to
define dial-in numbers for this conference. If you do not define a dial-in
number, the system will assign a dial-in number from the range of dial-in
numbers defined in the Network Service. The dial-in number appears in
the Status pane of the MGC Manager screen.
13. The H.323 Network Service prefix is automatically assigned to the
conference after the Meeting Room is saved on the MCU. It is then
displayed in the first row of the Meet Me Service - H.323 Service table.
To add prefixes for H.323 participants to dial using other H.323 Network
Services, click the Plus (+) button.
14. Click OK.
The Meeting Room is added to the Meeting Rooms list.
Chapter 6 - Defining a New Audio Conference
6-11