Defining A New Video Conference; Defining A New Video Entry Queue - Polycom MGC-100 Getting Started Manual

Defining a New Video Conference

Defining a New Video Entry Queue

This chapter describes how to:
Define a Video Entry Queue
•
• Start an On Going Conference
• Set up a Meeting Room
For an overview of these types of conferences, see "Conference Types" on
page 4-1.
This section describes how to define a Video Entry Queue. To define an
Audio Only Entry Queue, see "Defining a New Audio Only Entry Queue"
on page 6-1.
If an Entry Queue is set to Video Switching, its audio, video, and line rate
settings must be the same as its destination conference settings, or the
participants will not be able to move to the target conference.
Entry Queues can only be defined in MCUs containing an Audio+ card.
If you have not already done so, define the Entry Queue Message Service in
the MCU - IVR Services before defining the Entry Queue. For more details,
see the MGC Manager User's Guide, Volume II, Chapter 2.
Entry Queues can be encrypted. For more details, see the MGC Manager
User's Guide, Volume II, Chapter 1.
7
7-1