Polycom MGC-100 Getting Started Manual page 114

MGC-50/MGC-100 Getting Started Guide
5-14
To add a new participant to a Conference:
1. List the On Going Conferences.
2. Right-click the icon of the conference to which to add a participant, and
then click New Participant. Alternatively, click the conference icon, and
then click the New Participant button on the Conference Toolbar.
The Properties - Identification dialog box opens.
The Identification parameters change according to the selected Interface Type.
The Audio Only option is automatically selected when adding participants to an
Audio Only conference.
3. In the Name box, enter the participant's name.
4. In the Connection Type box, select Dial-out. This connection type is
applicable to ISDN, SIP, H.323, MPI and T1-CAS interfaces.
If the Dial-Out Manually option in the Conference Properties - Participant tab is
disabled, the MCU automatically calls the participant at conference time. If this
option is enabled, the operator must connect the participant.
5. Select one of the options from the list of available Interface Types:
ISDN, T1-CAS, H.323, SIP or MPI.
When selecting the Interface Type, various fields change, depending on the
Interface Type selected.