Polycom MGC-100 Getting Started Manual page 128

MGC-50/MGC-100 Getting Started Guide
6-2
The Entry Queue Properties dialog box opens.
3. In the Name box assign a name to the Entry Queue using up to 20
characters.
4. To manually assign the Numeric ID, enter in the Numeric ID box the
number of digits defined in the appropriate flag in the system.cfg file (the
default value is four). If left blank, the MCU will automatically assign
the Numeric ID when completing the definition and saving the Entry
Queue.
5. In the Entry Queue Service box, select the Entry Queue Service to be
used to play audio messages and prompts to participants waiting in the
Entry Queue.
6. In the Target Conferences box, select the Audio Only check box to define
an Audio Only Entry Queue. If the Audio Look & Feel mode is enabled
in the MGC Manager, this option is automatically selected.
7. If you select the IP Only Target Conference, configure the audio
algorithm to use for Entry Queue VoIP participants. The Target
Conference Settings Audio Alg settings provide additional audio options
such as G.723/G.729. If set to Auto, the system connects the participants
using the best available audio algorithm.