Polycom MGC-100 Getting Started Manual page 148

MGC-50/MGC-100 Getting Started Guide
7-10
19. To enable the Conference On Port option, select its check box. This
option is available if Continuous Presence was selected in the
Conference Properties - General tab. For more information about this
conferencing method, see "Video Conference Types" on page 4-3.
20. To enable encryption at the conference level, select the Encryption check
box. For details about Encryption and encrypted conferences, see the
MGC Manager User's Guide, Volume II, Chapter 1.
21. Use the default settings for all other video and conference options. For a
detailed description of these options, see the MGC Manager User's
Guide, Volume I, Chapter 4 and the MGC Manager User's Guide,
Volume II, Chapter 1, "Dual Stream Modes".
22. Optional. Click the Participants tab to add predefined participants to the
conference. For more information on adding participants to a conference,
see "To add a pre-defined participant to a conference:" on page 5-16.
23. If you selected Continuous Presence in the Video Session area of the
General tab, click the Video Sources tab.
The Conference Properties - Video Sources tab opens.
24. Select the appropriate Video Layout for the conference. The available
layouts displayed are determined by the type of Continuous Presence
mode selected on the General tab. For more information about setting
Video Layouts, see the MGC Manager User's Guide, Volume I, Chapter
6, "Setting Video Layouts".