Installing The Mgc Manager - Polycom MGC-100 Getting Started Manual

MGC-50/MGC-100 Getting Started Guide

Installing the MGC Manager

Initial IP
Configuration
Installing the
MGC Manager
Starting the MGC
Manager
Defining an MCU
Connecting
to an MCU
Configuring the
Network Services
3-4
To setup conferences and to control the MGC unit you must install the MGC
Manager software on a PC. Up to 30 MGC Manager-enabled PCs can be
connected to each MGC-50 or MGC-100. A single MGC Manager-enabled
PC can manage multiple MGC systems.
During the installation, default Reservation templates are installed.To install
the MGC Manager software:
1. Insert the software CD into the CD drive.
2. On the Start menu, click Run.
The Run dialog box opens.
3. Type D:\SETUP (where D is the name of the CD drive), and then click
OK.
The installation wizard starts and the License Agreement window opens.
4. Click Yes to agree to the terms of the agreement or No to exit the
installation.
If you clicked Yes, the Welcome window opens.
5. Click Next.