Dialing-In To A Conference - Polycom MGC-100 Getting Started Manual

MGC-50/MGC-100 Getting Started Guide

Dialing-in to a Conference

5-4
Dial-in participants can access the conference using the following methods:
Audio Only and ISDN Video participants - dial the conference ISDN
•
dial-in number.
H.323 participants when a gatekeeper is present - dial the IP Network
•
Service Prefix and conference Numeric ID or name.
• For conferences defined as Meet Me per Conference or Meeting Rooms, the
IP Network Service Prefix is displayed in the Status pane of the MGC
Manager.
•
The IP Network Service prefix is assigned when defining the IP Network
Service. For more information about the IP Network Service, refer to
Chapter 3.
For example, if the IP Network Service prefix is 27, the conference
Numeric ID is 1478 and the conference name is 'MARKETING', the
participant can dial 271478 or 27MARKETING.
H.323 participants when a gatekeeper is not present - dial the IP address
•
of the IP card.
• SIP participants (if the SIP server and domain are defined in the IP
Network Service) - dial the conference URI. For example,
MRO1@polycom.com.
If the conference included IVR parameters, the participant will have to enter a
password before entering the conference.
Dial-in participants can also access a conference via a single-dial Entry
Queue. The dialing methods are the same as for the conference. In the default
templates, just the Audio Only template is defined with Entry Queue Access.
To create a new video conference with Entry Queue Access, see "Creating an
On Going Video Conference" on page 7-6.