Polycom MGC-100 Getting Started Manual page 141

assigns the Numeric ID provided the MCU is configured to support
automatic assignment of Numeric IDs.
4. In the Entry Queue Service box select from the list of predefined Entry
Queue Services the one that will be used to play audio messages and
prompts to participants waiting in the Entry Queue. Leave this field
blank to use the default Entry Queue Service.
5. In the Target Conferences area:
a. Ensure the Audio Only check box is cleared.
b. Select the IP Only check box to create an IP Only Entry Queue,
whose target conferences are IP Only conferences. The target
conferences can be set as VoIP conferences (Audio Only, IP Only)
or Classic Continuous Presence (video).
c. To create an encrypted Entry Queue, select the Encryption check
box. For details about Encryption and encrypted Entry Queues, see
the MGC Manager User's Guide, Volume II, Chapter 1.
d. Select Video Switching, Transcoding or Continuous Presence as the
conference type. For more information, see Chapter 4, "Video
Conference Attributes" on page 4-5.
For an Entry Queue defined as Video Switching, conferences
accessed from this Entry Queue must be defined with the same
parameters as defined for the Entry Queue. To create such a
conference, see "Creating a Target Conference from an Entry
Queue" on page 7-5.
e. Select the Transcoding or Continuous Presence option to define a
Transcoding or Continuous Presence Entry Queue. Participants
connecting to this Entry Queue can connect at any line rate up to a
maximum rate defined for the Entry Queue. This rate is maintained
when the participant is moved to the target conference, even if the
target conference is set to a higher line rate, or if the endpoint can
Chapter 7 - Defining a New Video Conference
7-3