Changing The Layout In A Continuous Presence Conference - Polycom MGC-100 Getting Started Manual

Changing the Layout in a Continuous Presence Conference

You can select a particular Video Layout (that is a specific arrangement of
video windows on the screens) or Auto Layout during On Going Continuous
Presence conferences.
To change the layout in a Continuous Presence conference:
1. In the Browser pane, expand the On Going Conference list.
2. Right-click the on going conference icon, and then click Properties.
The Conference Properties dialog box opens.
3. Click the Video Sources tab.
The Conference Properties - Video Sources dialog box opens.
4. To enable Auto Layout, select the Auto Layout check box. The system
automatically and dynamically applies layouts with the appropriate
number of display windows according to the number of connected video
participants.
5. To select a particular video layout, clear the Auto Layout check box if it
is selected.
5a. Determine the number of windows to appear on the screen, and click the
arrow next to the numbered Video Layout icon to display the available
video layouts for the selected number of windows.
5b. Click the desired Video Layout.
6. Click the Apply button to save these changes and modify additional
properties or click OK to confirm and exit the Properties dialog box.
For information about Auto Layout, Personal Layout, Presentation
Mode, Lecture Mode and Visual Effects, see the MGC Manager User's
Guide, Volume I, Chapter 6.
Chapter 5 - Basic Operations
5-21