Defining An Mcu - Polycom MGC-100 Getting Started Manual

Defining an MCU

Initial IP
Configuration
Installing the
MGC Manager
Starting the MGC
Manager
Defining an MCU
Connecting
to an MCU
Configuring the
Network Services
To manage and control the MGC unit it must be added to the MCUs network
list in the MGC Manager application
The MGC unit has to be installed and its IP address properly
configured before defining its connection parameters in the MGC
Manager application. For details, see "Initial IP Configuration" on
page 3-1.
To define an MCU Connection:
1. In the Browser pane, right-click the MCU Network icon, and then click
New MCU.
The Add MCU dialog box opens.
2. In the Name box, enter the name of the MCU. Specify a name that clearly
identifies the MCU.
3. In the IP Address box, enter the IP Address of the MCU.
The IP address should be identical to the one configured during the Initial IP
Configuration.
Chapter 3 - Initial System Configuration
3-7