Entry Queue Dial-In Number Table - Polycom MGC-100 Getting Started Manual

Entry Queue Dial-in Number Table

The list of dial-in numbers assigned to the Entry Queue is displayed in the
Dial-in Numbers table. Up to 16 dial-in phone numbers may be assigned to
the Entry Queue.
If no dial-in number is assigned to the Entry Queue, the system assigns a dial-in
number from the dial-in numbers ranges defined in the ISDN Network Service.
The number is assigned only when the Entry Queue definition is completed. This
dial-in number is displayed in the Status pane. For more information, see
Chapter 5, "Dialing-in to a conference" on page 5-4.
To manually assign a ISDN/T1-CAS dial-in number:
8. In the Dial-in Numbers table, click the plus
The Meet Me Service dialog box opens.
9. Enter the name of the Network Service (to be used by participants to
connect to the Entry Queue) exactly as it is defined in the Network
Service function (the system is case sensitive).
10. Enter the first dial-in number to be assigned to the Entry Queue.
11. Enter the second dial-in number to be assigned to the Entry Queue. This
number is optional.
12. Click OK.
The dial-in number is added to the table in the Entry Queue Properties.
13. Repeat the above steps to define additional dial-in numbers for the same
Network Service, or for additional Network Services.
14. In the Entry Queue Properties dialog box, click OK to complete the
Entry Queue definition.
Chapter 6 - Defining a New Audio Conference
button.
6-3