Polycom MGC-100 Getting Started Manual page 87

19. In the Spans dialog box, click Finish to complete the IP Network
Service definition.
The new network service is added to the IP Network Services list.
The following icons are used to indicate the IP Network Service type:
Table 3-18: IP Network Service Icons
Icon
By default, the first IP Network Service you define is set as the system
default. When defining additional IP Network Services this default can
be changed. For more details, see the MGC Administrator's Guide,
Chapter 3.
Chapter 3 - Initial System Configuration
Description
The Network Service supports both SIP and H.323
connections.
The Network Service supports only H.323
connections.
The Network Service supports only SIP connections.
3-57