Designing Audio Behaviors - Polycom V500 Administrator's Manual

Designing Audio Behaviors

To install People+Content IP on a computer:
1. On the computer, open a web browser and log on to the Polycom
Resource Center Video Downloads page at
http://extranet.polycom.com.
2. Locate the People+Content IP application and click the link to download
the file locally.
3. Double-click setup.exe.
4. Follow the steps in the Setup Wizard to finish installing the application
on the computer.
Anyone using that computer can then double-click on the
People+Content IP icon to present content during video conferences using
the V500 system.
You can make the application available to all users in your organization by
downloading the setup.exe file to a local location that everyone can access.
This section describes how to configure the audio behaviors of the
V500 system.
To configure general audio settings:
1. Go to System > Admin Settings > Audio.
2. Configure these settings:
Setting
Master Audio
Volume
Sound Effects
Volume
Incoming Video
Call
User Alert Tones
Bass
Treble
Description
Sets the volume level for audio from the far site.
Sets the volume level of the ring tone and user alert tones.
Specifies the ring tone used for incoming calls.
Specifies the tone used for user alerts.
Sets the volume level for the lower frequencies without
changing the master audio volume.
Sets the volume level for the higher frequencies without
changing the master audio volume.
Customizing the V500 System
4 - 9