Providing Captions Via A Telnet Session - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System
4 - 30
To supply closed captions for a conference using the V500 web interface:
1. On a computer, open a web browser.
2. In the browser address line, enter the IP address of the system (for
example,
http://10.11.12.13
3. Enter your user name and the password, if a password has been
established.
4. Go to Utilities > Closed Caption.
5. In the Closed Caption screen, type the caption text into the text field. Text
wraps to the next line after 59 characters.
6. Press Enter to send the text to the sites in the conference.

Providing Captions Via a Telnet Session

Closed captioners can provide captions from inside the conference room, or
from a remote location, by entering captions via a Telnet session, as shown in
the following diagram.
Telnet session
To supply closed captions for a conference using a Telnet session:
1. On a computer, open a command line interface.
2. Start a Telnet session using the V500 system IP address and port 24 (for
example,
telnet 10.11.12.13 24
3. Enter the command
4. Press Enter to send the text.
5. To stop sending closed captions, press Ctrl-Z.
) to go to the V500 web interface.
LAN
).
to start captioning.
cc
V500 System
LAN
port