Call Detail Report Archives - Polycom V500 Administrator's Manual

Call Detail Report Archives

Data
Average Latency
(Rx)
Maximum Latency
(Tx)
Maximum Latency
(Rx)
Average Jitter (Tx)
Average Jitter (Rx)
Maximum Jitter (Tx)
Maximum Jitter (Rx)
Calls are added to the CDR until the file size reaches 50 KB, which is equivalent
to about 150 calls. The system then automatically archives the CDR and creates
a new CDR file. If an archive is already present, the new archive overwrites it.
Each CDR starts with Row 1, but the conference numbers continue from the
file most recently archived. Conference numbering restarts at 1 after the
system assigns conference number 100,000.
To get an archived CDR:
1. From your computer, open an FTP client.
2. FTP into the V500 system.
3. Enter this FTP command:
GET localcdr_archive.csv
4. Close your FTP session.
Description
The average latency of packets received during an H.323
call based on round-trip delay, calculated from sample tests
done once per minute.
The maximum latency for packets transmitted during an
H.323 call based on round-trip delay, calculated from
sample tests done once per minute.
The maximum latency for packets received during an H.323
call based on round-trip delay, calculated from sample tests
done once per minute.
The average jitter of packets transmitted during an H.323
call, calculated from sample tests done once per minute.
The average jitter of packets received during an H.323 call,
calculated from sample tests done once per minute.
The maximum jitter of packets transmitted during an H.323
call, calculated from sample tests done once per minute.
The maximum jitter of packets received during an H.323
call, calculated from sample tests done once per minute.
System Usage and Statistics
6 - 7