Configuring Integration With Avaya Networks - Polycom V500 Administrator's Manual

Setting Description
H.323 Extension You can place point-to-point calls using the extension if both
(E.164) systems are registered with a gatekeeper.
The default H.323 Extension is based on the system serial
number, but you can change it. Your dial plan may define the
extensions you can use.
Gatekeeper IP If you chose to use an automatically selected gatekeeper,
Address this field displays the gatekeeper's IP address.
If you chose to specify a gatekeeper, enter the IP address
here.
Authentication Specifies the password PIN to use for authentication with the
PIN Avaya Communication Manager®. This setting is available
when Use Gatekeeper is set to Specify with PIN.
Alternate If your H.323 network infrastructure has been configured to
Gatekeeper use an alternate gatekeeper when the primary gatekeeper is
not available, the alternate gatekeeper is displayed in this
field.
Alternate gatekeeper support is configured on the primary
gatekeeper, and the V500 system is notified of this
configuration when it registers to the gatekeeper on startup.

Configuring Integration with Avaya Networks

V500 system with an Avaya option key can use the following features on an
Avaya telephony network:
• Call forwarding (all, busy, no answer)—Configured by the Avaya
Communication Manager (ACM) administrator and implemented by the
user
• Call coverage—Configured by the ACM administrator
• Transfer—Implemented via flash hook and dialing digits
• Audio conference—Implemented via flash hook and dialing digits
• Call park
• Answer back
• DTMF tones for Avaya functions
Refer to the Avaya documentation and Getting Started Guide for the V500 System
for information about these features.
Configuring Network Use
3 - 17