Actions That Cause The System To Restart - Polycom V500 Administrator's Manual

Actions that Cause the System to Restart

The V500 system restarts in the following situations:
• Changing any of the following settings in the LAN Properties screens:
— Connect to My LAN
— Host Name
— IP Address — Changing how the system obtains an IP address or
changing the address that you have entered manually
— DNS Servers
— Default Gateway
— Subnet Mask
— WINS Server
— LAN Speed
— Duplex Mode
• Changing any setting under Enable Remote Access, on the Security
screen:
— FTP
— Web
— Telnet
— SNMP
• Changing the Web Access Port on the Security screen
• Changing any setting on the SNMP screen:
— Enable SNMP
— Community
— Contact Name
— Location Name
— System Description
— Console IP Address
Appendix
Appendix - 3