Changing System Appearance; Setting Ring Tones And Alert Tones - Polycom V500 Administrator's Manual

Changing System Appearance

Different user interface color schemes are available, allowing you to
coordinate the system interface with the room décor.
To change the system appearance:
1. Go to System > Admin Settings > General Settings > System Settings >
Appearance.
2. Configure these settings:
Setting Description
Color Scheme Customizes the look of your system with different color
schemes.
Screen Saver Specifies how long the system remains awake during periods of
Wait Time inactivity. The default is 3 minutes. Setting this option to Off
prevents the system from going to sleep.
You can allow users to change color schemes by allowing user access to the
User Settings screen.

Setting Ring Tones and Alert Tones

To set ring tones and alert tones:
1. Go to System > Admin Settings > Audio.
2. Select a tone, as desired.
To set the V500 system internal ringer:
1. Go to System > Admin Settings > Audio.
2. Select Enable Internal Ringer to specify an additional ring tone when
receiving an incoming call. The ringer is built into the system and will
alert you to incoming calls.
Customizing the V500 System
4 - 27