Enabling Aes Encryption; Configuring Call Settings - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System

Enabling AES Encryption

Configuring Call Settings

4 - 16
AES encryption is a standard feature on every V500 system. When it is
enabled, the system automatically encrypts calls to other systems that have
AES enabled.
To enable AES encryption:
Go to System > Admin Settings > General Settings > Security and select
AES Encryption.
The Call Settings screens provide access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated on
these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Call Settings.
2. Configure these settings:
Setting Description
Maximum Time in Enter the maximum number of minutes allowed for call
Call length.
When that time has expired, you see a message asking you
if you want to hang up or stay in the call. If you do not answer
within one minute, the call automatically disconnects. If you
choose to stay in the call at this time, you will not be
prompted again.
Choosing 0 removes any limit.
Auto-Answer Specifies whether to answer incoming point-to-point calls
Point to Point automatically.
Display Time in Specifies whether to display the elapsed time or the local
Call time during a call. You can also choose not to display the
time.