Adjusting The Monitor's Color Balance; Designing Audio Behaviors - Polycom V500 Administrator's Manual

Adjusting the Monitor's Color Balance

Designing Audio Behaviors

© Polycom, Inc.
In most cases, the monitor you connect to your system provides natural color
without any adjustment. Depending on your environment as well as the model of
monitor, however, the video may exhibit one of these problems:
Picture is too dark
Colors appear faded
Picture has too much of one color — for example, the picture may appear
greenish
If you notice any of these, the monitor needs to be adjusted.
To adjust the monitor for natural color:
1. Go to System > Diagnostics > Video.
2. Select the Color Bars icon to display the color bar test screen.
3. Adjust the color using the monitor's controls for color, contrast, and
brightness. Your monitor may also have controls for tint and temperature.
4. When the colors look right on the test screen, press the
remote control to stop the Color Bars test and show video of the room.
5. If the color appears natural, you do not need to make further adjustments.
If the color still needs adjustment, use the monitor's controls to make small
adjustments until the picture appears natural.
This section describes how to configure the audio behaviors of the V500 system,
including:
General Audio Settings
Volume on an External Audio System
Chapter 4 - Designing the User Experience
Near button on the
4 - 9