Screens That Require The Room Password For Access - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System
Admin Settings
General Settings Network
System Settings
Home Screen Settings
Security
Location
Options
IP
ISDN*
Call Preference
Recent Calls
4 - 12
To use the same password for both local and remote access:
1. Go to System > Admin Settings > General Settings > Security.
2. Select Use Room Password for Remote Access.
To reset a forgotten password:
1. Get the system's serial number from the system or from the System
Information screen.
2. Go to System >Diagnostics > Reset System.
3. Enter the system's serial number and select Delete System Settings.
4. Select Reset System.
After the system resets, it leads you through the setup wizard. You can enter a
new password when you set up the system.

Screens that Require the Room Password for Access

The following illustration shows which screens require the room password.
Diagnostics System Information
Monitor Camera
H.323 Settings
SIP Settings
Quality of Service
Firewall
Password Protected
Utilities
General Access
Audio LAN Properties
* May not be present for all system types
User Settings
Global Services
Directory Servers
Dialing Rules
SNMP
Management Servers
Account Validation
My Information