Adding A Screen Saver News Feed; Adding A Screen Saver Logo - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System
4 - 26

Adding a Screen Saver News Feed

You can customize the V500 system to display a news feed when the system is
in sleep mode.
Output upon Screen Saver Activation on the Monitors screen must be set to
Black if you want to display a screen saver news feed.
To configure a screen saver news feed:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and remote access password, if a password has been
established.
4. Click Utilities > Screen Saver, and paste a feed URL into the News Feed
field.
5. Select a stream content, click Submit, and close the stream content
window.
6. Click Update.

Adding a Screen Saver Logo

You can customize the V500 system to display your own logo instead of the
Polycom logo. The requirements for the logo file are:
• File format is .png format, 8-bit color.
• Image size is 300 x 300 pixels or smaller.
• File size is 87.9 Kbytes or smaller.
To upload a screen saver logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and remote access password, if a password has been
established.
4. Click Utilities > Screen Saver, click Next, and follow the onscreen
instructions to create and upload your logo file.
, to go to the V500 web interface.
, to go to the V500 web interface.