Diagnostic Code 6: Diagnosticc; Diagnostic Code 7: Not Used; Diagnostic Code 8: Last Sale Limit - Bennett 3000 Series Operation Manual

Hide thumbs Also See for 3000 Series:

Table of Contents

This code is not supported in this application.

Diagnostic mode 8 is intended for dispensers programmed to display Decimal Mode 0 and Gallons. This

function displays the sale limit, and amount of the last ten sales for the selected side. Money limits are

shown with two decimal digits and volume limits are shown with three decimal digits. Also, useful to

show the last limits that we were given from the POS in a prepay overrun.

Limit types that will display if they occur:

• 1 = Prepay Volume

• 2 = Prepay Money

• 3 = Allocation Limit

• 4 = Preset Money

• 5 = Preset Volume Amount

• 6 = Generic Loop Money Limit

• 7 = Overflow Display – The dispensed money amount exceeds the main display limits.

To view Last Sale Limits:

1. Press 0, Mode to enter diagnostics Mode 00.

2. Press 8, Enter.

a. Line 1 of the Main Display will show "TYPE (0-6)"

b. Line 2 will show the corresponding quantity.

c. The PPV Display will show "DIAG".

3. Press Enter to view the number of sales in descending chronological order (if available).

4. Press Cancel to exit this test.

3000 Series Operation Manual

Back to TOC

Diagnostics

Table of Contents