Electro -Mechanicalt; Simply Secure Payment - Bennett 3000 Series Operation Manual

Magnet Action
Touch magnet to Totals
Reed Switch
Lift away reengage
Lift away reengage
Lift away reengage
1.7.2 LAST SALE RECALL SWITCH
The last sale recall switch location is shown on Figure 1.10. When the dispenser AC power is OFF, see
Section 2.3 AC OFF Message, the recall switch connects the displays to the battery and shows the last
sale.
NOTE: If a pump handle is lifted and the dispenser is activated during this operation, the display returns
to idle.
To recall the last sale with battery power:
• Hold the Access Magnet over the location shown on Figure 1.10 for approximately 2 seconds.
• The last sale in progress will display for 30 seconds.
• Holding the magnet in place continuously will bring up last sale information every 60 seconds.
1.8 ELECTRO-MECHANICAL TOTALIZER - OPTIONAL
The electro-mechanical totalizer displays cumulative totals in gallon or liter increments for each product
being dispensed. The totalizer is located below the volume display.
NOTE: Because of rounding methods used in electronic totals, over time electronic totals and electro-
mechanical totals will not match exactly.
1.9 SIMPLY SECURE PAYMENT (SSP) - OPTIONAL
With the SSP option customers pay for fuel with a payment card and receive a receipt. The dispenser is
connected to a financial network through a Point of Sale (POS) system that authorizes approval of
payment cards.
3000 Series Operation Manual
Dispenser Display
E C A L 1 A , b , c
0 0 0 0 0 1
E C A L 2 A , b , c
0 0 0 0 0 1
u n i t c h
0 0 0 0 0
4 o l r E S
0 0 0 0
Back to TOC
Overview and Features
Audit Trail Sub-Menu Description
E-Cal changes for Side 1 meters.
E-Cal changes for Side 2 meters.
Volume Unit Changes (gallons to liters
to imperial gallons).
Volume resolution changes (0.001 or
0.01).
7