Ensor - Bennett 3000 Series Operation Manual

3.23 MENU CODE 19: DOOR SENSOR
Enable or disable the door sensors that detect an open upper or lower door on the dispenser. Optional
door hardware must be installed to allow this menu code to operate.
Door Sensor programming options:
• 0 = Door Sensor OFF
• 1 = Door Sensor ON
To program:
• The calibration switch on the 719 must be in the unsealed position to access menu code 19.
• Passcode required, see Section
Keypad Retail Display
Action Results
19, Mode
d o o r S n S r
O F F
d o o r S n S r
Type 1 or 0
- - - - O n
d o o r S n S r
Enter
C 0 d E
Cancel
3000 Series Operation Manual
3.4 Menu Code 3: Manager
Volume Only
Display Results
S c t i o n 0
S c t i o n - - 1
S c t i o n 1
O n
C O d E 0 0
0 0
Back to TOC
Access.
Lower PPV
Display Results
Default is 1. Type desired
C O d E
Type desired setting listed.
C O d E
C O d E
S i d E -
Setup and Programming
Description
setting listed.
Enter to save.
Exit Menu Code
34