Ption; Reset - Bennett 3000 Series Operation Manual

3.20 MENU CODE 15: FLEET OPTION
NOTE: If this is a two-sided dispenser, changing one side will automatically change the second side to
the same value as the first
The Fleet Option typically applies to dispensers connected to a fleet system interface in non-retail
commercial environments.
When enabled price can be changed by the POS after the nozzle is lifted and handle switch is activated,
such as in loyalty or point of purchase discount programs.
Fleet Option programming options:
• 0 = The fleet option is disabled.
• 1 = (Default) enabled.
To program, follow this procedure:
• Passcode required, see Section
Keypad Retail Display
Action Results
15, Mode
F L E E t
F L E E t —
Type 1 or 0
- - - - 0
F L E E t
Enter
C O d E
Cancel
3.21 MENU CODE 17: LOCAL PRESET
See Appendix A for Local Preset.
3000 Series Operation Manual
3.4 Menu Code 3: Manager
Volume Only
Display Results
F L E E T 1
1
F L E E t — 0
F L E E T 0
0
C O d E 0 0
0 0
Back to TOC
Access.
Lower PPV
Display Results
C O d E
Type desired setting listed
C O d E
in bullets above.
C O d E
S i d E -
Setup and Programming
Description
Default is 1.
Enter to save.
Exit Menu Code
32